Electrical Requirements
Blows Per Minute
Variable Speed Settings
Handle Types
Included Chisels
Chisel Shank Size
Chisel Retainer
Note: SDS and SDS MAX chisels (both not included) can be used with this Demolition
Hammer.
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
WARNINg! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury. The term "power tool" in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
1.
Keep your work area clean and well lit.
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SKU 93853
For technical questions, please call 1-800-444-3353
SpEcIFIcATIONS
120 V~ / 60 Hz / 1500 W
20 A (Start Up) / 9.5 A (No Load) / 13.0 A (With Load)
Power Cord Type: 82" Long / 14 AWG x 2C
Power Cord Plug Type: 2-Prong / Polarized
Power Switch Type: 2-Position Toggle Switch w/Slider Cover
900 ~ 1800 BPM (Using Variable Speed Dial)
1-2-3-4-5-6
Fixed Main Rear Handle (7" x 4-1/4" x 1-3/8")
Rotating Swivel "D" Style Auxiliary Handle (6" x 5" x 1-1/4")
Bull Point (13-7/8" Long / Qty. 1)
Spade (1" Wide x 13-7/8" Long / Qty. 1)
45/64" Diameter
Quick-Release Retainer
SAVE THIS MANuAL
gENERAL SAFETY RuLES
SAVE THESE INSTRucTIONS
WORK AREA
Cluttered benches and dark areas
REV 06f
PAGE 2