Advertisement
OPERATING YOUR BEVERAGE COOLER
OPERATING INSTRUCTIONS
1. Gently place/slide the racks into the beverage cooler.
2. Determine the best temperature setting to use.
3. Place beverage cans inside the beverage cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and maintain proper storage
temperature.
6. Turn the interior light on and off by touching the button labeled with a light on the control panel.
Important: When using the beverage cooler for the first time, please allow at least 24 hours for the internal
temperature to adjust properly.
Your wine cooler has a touch screen control panel on the upper part of the glass door.
The inside temperature of the compressor beverage cooler depends on the room temperature.
The beverage cooler can be adjusted in the range of -5°—18°C (< ± 2°C), when it is located in an ideal
room temperature of 25°C. The beverage cooler should be placed in a position where the ambient
temperature is between 16-32°C/60-90°F. Humidity level is under 60%. If the position is above or below
this range, the performance of the unit may be affected. For example, placing your unit in extreme cold
or hot conditions may cause interior temperature to fluctuate.
Your beverage cooler has only one control for regulating the temperature. The temperature
control is located on the upper part of the glass door.
The first time you turn the unit on, set the temperature control to "Max".
The range of the temperature control is from position "Min" to "Max". After 2 hours, adjust the
temperature control to the setting that best suits your needs.
This beverage cooler is provided with a LED light located at the top interior space. You can turn
the interior light ON or OFF by pressing the Light switch.
TEMPERATURE SETTING PANEL
9
Advertisement
