Lighting Instructions - Napoleon BIPRO500RBSS-3 Instruction Manual

Hide thumbs Also See for BIPRO500RBSS-3:
Table of Contents

Advertisement

8

Lighting Instructions

EN
WARNING!
!
WARNING!
supply valve.
knob slowly to the high position. If
down on the control knob until the
3. If the pilot does not ignite, then
immediately turn the control knob
back to the 'off position and repeat
gas to dissipate. Either repeat steps
corresponding burner valve to high.
!
WARNING!
www.napoleon.com
Igniter
Left
Left Centre
Burner
Burner
Open lid
Ensure all burner controls are in the off position. Slowly turn on the gas
Main Burner
Lighting
1. Open grill lid.
2. Push and turn any main burner
the pilot lights, continue to push
burner lights and then release.
step 2 several times.
4. If the pilot and burner will not
ignite within 5 seconds, turn the
control knob to the 'off' position
and wait 5 minutes for any excess
2 and 3 or light with a match.
5. If lighting the unit with a
match, clip the match into the
supplied lighting rod. Hold the
lit match down through the grill
and sear plate while turning the
Do not use rear burner while operating main burner.
Rear
Right
Right Centre
Burner
Burner
Burner
Rear Burner Lighting
(if equipped)
1. Open grill lid.
2. Remove warming
2. Turn side burner control to
rack.
3. Turn rear burner
control to high
igniter button until burner
position.
4. Press and hold
igniter button until
immediate, turn burner control
burner lights, or light
off. Wait 5 minutes. Repeat.
by match.
5. If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
Repeat.
Lights
Off Position
Side Burner Lighting
(optional)
1. Open burner cover.
high position.
3. Press and hold
lights, or light by match.
4. If ignition is not
N415-0541 JUL 17.20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bipro500-3Prestige pro 500

Table of Contents