Table of Contents
Advertisement
18
BUILT-IN UNIT OPENING DIMENSIONS
EN
MODEL
BIP / BIPRO500
SIDE BURNER
!
WARNING!
materials when installed with zero clearance liner Part No. BI-3323-ZCL and must be installed and ser-
viced by a qualified installer to local codes.
WARNING!
materials (certified to ASTM E-136) when finishing the appliance (e.g. steel studs, cement board, ce-
ramic tile, marble, paint, etcetera). Do not use wood or drywall.
!
Note: Accessory frames
overlap opening by 1 ¾"
on all 4 sides.
ELECTRICAL OPENING
OPENING FOR WIRES
(2" (51mm)
34" (864mm)
RECOMMENDED
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
www.napoleon.com
OPENING DIMENSIONS
W
D
H
30 3/4"
20 5/8"
8 7/8"
781 mm
524 mm
225 mm
12 3/4"
16 1/2"
4 1/2"
324 mm
419 mm
114 mm
This grill is designed for installation in a built-in enclosure constructed of combustible
WARNING! If not installing with the Zero Clearance Liner, use only non-combustible
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
H
!
WARNING!
can not be stored below the gas
grill.
WARNING!
!
AND COUNTER TOP MUST BE MADE FROM
NON-COMBUSTIBLE MATERIAL WHEN NOT
INSTALLED WITH THE ZERO CLEARANCE LINER PART
NO. BI-3323-ZCL
NOTES
WITHOUT ZERO CLEARANCE LINER
OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
COMBUSTION AIR FOR SIDE BURNER.
BUILT-IN SIDEBURNER
H
A propane tank
CABINET FRAME, CABINET
N415-0541 JUL 17.20
Advertisement
Table of Contents
