CyberPower CyberShield BAS34U24V User Manual

User's Manual for
OVERVIEW
3 4 5 6 7 8
LED INDICATOR
Indicator Color
STATUS Green Indicates normal mode of operation.
Indicates the battery is supplying the power.
1.Battery mode : LED is on.
DC Green
2.Line mode : LED is off.
3.Low battery : LED is blinking.
1.Battery replacement required : LED is on.
BATTERY Red
2.Battery is absent : LED is blinking.
Indicates the Remote Management Card power.
1.Power on : LED is on.
Green
2.Power off : LED is off.
ETHERNET
3.Receiving/transmitting data packet : LED is blinking.
PORT
4.Reset finished : LED is blinking.
Yellow The Remote Management Card is connected to the Network.
CyberShield
BAS34U24V
Number Description
1 LED Indicator
2 Ethernet Port LED Indicator
3 AC Power Cord Connector
4 DC Output Connector (5W/0.21A)
1
5
Universal (Serial) Port
6
Ethernet Port
2
7
DC Output Connector(24W/1A)
8
External Battery Connector
9
Locking Clip
10
Rail Slot
9
10
Condition
CyberShield UPSs are designed to provide a local power solution for
cable telephony, wireless local loop (WLL), and fiber to the home
(FTTH) broadband equipment.
IMPORTANT SAFETY WARNINGS
(SAVE THESE INSTRUCTIONS)
This manual contains important instructions regarding the installation and operation of this device.
Read this manual thoroughly before attempting to unpack, install, or operate this device.
CAUTION! Do not store batteries or battery-powered devices in hot places — elevated temperatures
can lead to capacity loss, leakage, or rupture.
CAUTION! Do not dispose of batteries in a fire. The battery may explode if improperly disposed.
Recycle the battery in accordance with local regulations.
CAUTION! Do not disassemble, crush, puncture, or otherwise damage batteries. This can result in
leakage or rupture.
CAUTION!
Do not remove the cover, except to service the battery, to reduce the risk of electric shock.
CAUTION! Do not open or mutilate the battery. Released material is harmful to the skin and eyes. It
maybe toxic.
CAUTION! When replacing the battery, the replacement should have the same rating as followers,
18650 Lithium-ion Rechargeable Battery, 14.8V/6500mAh.
CAUTION! To reduce the risk of electric shock, do not remove the cover. No user serviceable parts
inside including the battery. Please contact us or our dealer directly.
CAUTION! Never block or insert any objects into the keyholes or other openings of the UPS.
To prevent the risk of fire or electric shock, install in a temperature and humidity controlled
CAUTION!
indoor area, free of conductive contaminants. (Please see specifications for acceptable
temperature and humidity range).
CAUTION! This unit must be DIN rail. Do not use the unit unless it is mounted correctly.
CAUTION! The unit is for indoor use only. Please avoid direct sunlight exposure.
CAUTION! Runtimes based on testing fully-charged, new batteries at normal operating conditions.
Runtime curve is approximate and varies based on battery age, level of charge at test,
environment, and other variables.
BATTERY REPLACEMENT AND INSTALLATION
As long as utility power is on, you may leave the UPS and connected equipment on while replacing
a new battery. (For service personnel reference only)
Step 1: Step 2:
a. Upside down the unit. a. Tack away the battery cover.
b. Loosen four screws from enclosure.
a.
b.
Step 4: Step 5:
a. Disconnect the battery cable connector. a. Put the battery back into the compartment.
b. Install a new battery by connecting the
cable connector.
Step 7: Step 8:
a. Tighten up four screws from the enclosure. a. Upside down the unit to resume normal
operation.
BAS34U24V AND MOUNTING DETAILS
Mounting on DIN Rail
Step 3:
a. Remove the battery from enclosure.
Step 6:
a. Replace the battery cover.
Step 9:
a. Connect the AC cable to activate the unit.
Removing from DIN Rail