Chicago Electric 93881 Assembly And Operating Instructions Manual page 12

the Circuit Breaker and restart the Engine. (See Figure E.)
7. Grounding Nut (7): Use this feature to attach a ground wire to an external earth
ground. (See Figures D and E.)
8. Oil Dipstick Cover (12B): Remove this Cover to fill and check the level of
Engine oil. (See Figures B and E.)
9. Engine Pull-Start Cord: Grasp the Handle of the Pull-Start Cord and rapidly
pull the Handle to start the Engine. It may take one or more pulls on the Handle
to start the Engine. (See Figure E.)
10. 120V AC Outlet (4): Two 120 Volt Outlets supply power to 120 volt appliances,
tools, and equipment. (See Figure E.)
Before operation, it will be necessary to refer to the Engine
manufacturer's "Operation, Maintenance, and Parts" manual (included) for
detailed information about starting, running, stopping, and maintaining the Engine.
1. Check to make sure the Engine Power Switch (14) is in its "OFF" position.
(See Figure E.)
2. CAUTION! Make sure to unplug any load from the Generator before
starting to prevent permanent damage to any appliances, tools, or equipment.
3. CAUTION! Engine oil MUST be added to the Engine's crankcase
prior to starting and running the Engine. Failure to add oil, according to the
Engine manufacturer's recommendations, will damage the Engine and void its
warranty. (See page 8, and Figure B.)
4. Before the first use, the Fuel Tank (19B) must be filled with unleaded gasoline.
(See page 9, and Figure C.)
A. WARNING! Never fill the Fuel Tank (19B) completely. Fill the Fuel Tank
to 1/2" below the bottom of the filler neck to provide space for fuel
expansion. Wipe any fuel spills from the Engine and Generator before
starting the Engine.
B. WARNING! Never fill the Fuel Tank (19B) when the Engine is running
or hot. Do not smoke when filling the Fuel Tank.
SKU 93881 For technical questions, please call 1-800-444-3353
OPERATING INSTRUCTIONS
IMPORTANT:
PAGE 12