Advertisement
28
Place blade holders onto blades aligning holes
in blade holder with holes in blade. Make sure
that the side of the blade you select is facing
downward. Install 3 screws and fiber washers
to back side of blade as shown. Tighten
screws securely. Repeat this process 4 more
times until all blades are assembled.
© 2013 Monte Carlo Fan Company
29
Install blades to motor using the 10
motor screws provided. Tighten
screws securely.
6
30
Reverse switch
Install switch cap to fan using the 3
screws provided. Tighten securely.
Setting the reverse switch in the
left hand side will result in down-
ward airflow and setting the
switch in the right hand side will
result in upward airflow.
11/1/2013
Advertisement
