Advertisement
Quick Links
Owner's Guide and Installation Manual
5MS52XX Series Fan
UL Model No. : 5MS52
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
Total fan weight
Advertisement
Related Manuals for Monte Carlo Fan Company 5MS52 Series
Summary of Contents for Monte Carlo Fan Company 5MS52 Series
- Page 1 Owner’s Guide and Installation Manual 5MS52XX Series Fan UL Model No. : 5MS52 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com Total fan weight...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 11/1/2013...
- Page 3 Note:If Installing The Secondary Support Safety Ball. This must be done to prevent the fan body from the bracket. Cable in the U.S., Do Not Remove Knockouts In rotating when the blades are in motion. The Outlet Box. © 2013 Monte Carlo Fan Company 11/1/2013...
- Page 4 Install rubber pad between fan Remove every other screw as circled ward airflow and setting the body and canopy. and save for later use. switch in the right hand side will result in upward airflow. © 2013 Monte Carlo Fan Company 11/1/2013...
- Page 5 Refer to Safety Tips section of manual. tighten securely. other side of the outlet box. © 2013 Monte Carlo Fan Company 11/1/2013...
- Page 6 Tighten switch in the right hand side will screws securely. Repeat this process 4 more result in upward airflow. times until all blades are assembled. © 2013 Monte Carlo Fan Company 11/1/2013...
- Page 7 2.Check for loose or disconnected wires in fan switch housing. 4. If light does not work: 3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs. CAUTION: Make sure main power is turned off before entering switch housing. © 2013 Monte Carlo Fan Company 11/1/2013...
- Page 8 Jan.2012 New format Nov.2013 Update for CUL regulation...