Monte Carlo Fan Company 5MB52XXD Series Owner's Manual And Installation Manual
Monte Carlo Fan Company 5MB52XXD Series Owner's Manual And Installation Manual

Monte Carlo Fan Company 5MB52XXD Series Owner's Manual And Installation Manual

Advertisement

Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3 0 6 4 9 6 4
5MB52XXD Series Fan
ETL Model No. : 5MB52XXX
RETAILER NAME:
RETAILER ADDRESS:
10.7 kgs
23.54 lbs
Total fan weight with light kit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5MB52XXD Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Monte Carlo Fan Company 5MB52XXD Series

  • Page 1 Owner’s Guide and Installation Manual 5MB52XXD Series Fan ETL Model No. : 5MB52XXX Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 10.7 kgs...
  • Page 2 Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 1/15/2013...
  • Page 3 Place yoke cover on top housing of fan. Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2013 Monte Carlo Fan Company 1/15/2013...
  • Page 4 Lift canopy up, aligning remaining blades. its keyhole slot with the preassembled screw on mounting bracket and twist counterclockwise to lock in place. Reinstall the removed canopy mounting screw and tighten all screws securely. © 2013 Monte Carlo Fan Company 1/15/2013...
  • Page 5 14. Tighten all Reset the lights by turning off, replace screws securely. bulbs with the correct wattage bulbs, turn the power on. Caution: Do not replace bulb until it cools down. © 2013 Monte Carlo Fan Company 1/15/2013...
  • Page 6 3 set screws removed in step side will result in upward airflow. Note: Reverse switch must be set either way completely. If the reverse switch is set in the middle position, fan will not operate. © 2013 Monte Carlo Fan Company 1/15/2013...
  • Page 7 Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION WARNING © 2013 Monte Carlo Fan Company 1/15/2013...
  • Page 8 Jan.2013 May.2013 Update for UL regulation...

Table of Contents