Troubleshooting
Selecting from the Tools Menu
Select
HDD Self-test
Selecting from the Exit Menu
Select
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
2–6
Table 2-4
Tools Menu
To Do This
Run a quick or comprehensive self-test on any
hard drive in the system.
Table 2-5
Exit Menu
To Do This
Save changes entered during the current session.
Then exit and restart the notebook. The changes
you save are in effect when the notebook restarts.
Cancel changes entered during the current
session. Then exit and restart the notebook.
Replace configuration settings in Computer Setup
with factory default settings. (Identification
information is retained.)
Maintenance and Service Guide