Maxcom MM 28 D Manual page 6

Handset Connection
Connect the handset and the base of the phone with a coil cord.
Turn on or Turn off the Phone
Turn On: Move the power switch to the "ON" place and the screen will be light. The phone
begins to search the network and it can provide the services after getting into idle state.
Turn off: Move the power switch to the "OFF" place and the light of the LCD will go out which
indicates the phone is turned off.
You also can turn off the telephone by long pressing ON/OFF/EXIT key then long press it to turn
the phone on.
KEY-PRESS INTRODUCTION
 Power light indicator : When the phone is connected to the external power adapter, the
power light indicator will be always bright.
 MENU/OK key : In the idle state, press this key to enter menu ; In the menu operation state,
press this key to confirm.
 BOOK/DEL key : In the idle state, press this key to get into the phone book directly; In the
editing state, press this key to delete one character in front of the cursor; press this key to
return to the superior menu.
 ON/OFFEXIT key : Press and hold this key to turn on/off the telephone ; Press this key to
exit and return to the idle state directly
 CALL LOG key : In the idle state, press this key to get into the call records menu directly.
 MUSIC key : In the idle state, press this key to get into incoming ringing tones setting
interface.
 REDIAL key : In the idle state, press this key to dial the last dialed phone number.
 SEND key : Press this key to send the number at once after inputting the number; In the idle
state, press this key to get into dialed calls interface.
 RIGHT→ key : During editing the number or name , press this key to move the cursor to
6