Use Templates; Message Settings - Maxcom MM 28 D Manual

choose "Dial" or "Save" to SIM card or phone.
DRAFTS
1. In on-hook state, press MENU/OK key + 2 key to enter the Messages interface, the cursor
stops at Write message
2. Press UP↑ or DOWN↓ key to move the cursor to Drafts, press MENU/OK key to confirm
and enter the submenu with a list of messages failed sent but saved in the draft
3. Press UP↑ or DOWN↓ key to select the message you want to check the content
4. Press MENU/OK key to confirm and the content of the message is displayed on LCD.
5. After finished reading the message content, press MENU/OK key to confirm and then you
can do the rest operations the same with outbox.

USE TEMPLATES

1. In on-hook state, press MENU/OK key + 2 key to enter the Messages interface, the cursor
stops at Write message
2. Press UP↑ or DOWN↓ key to move the cursor to Use templates, press MENU/OK key to
confirm and enter the submenu with a list of template message
3. Press UP↑ or DOWN↓ key to select your desired template
4. Press MENU/OK key to confirm and enter the submenu of Edit, Erase, Write message
5. Press UP↑ or DOWN↓ key to select and do relevant operations to the following:
1) Edit: do some change to message content on the template such as adding some contents
2) Erase: delete the original message content on the template
3) Write message: it is similar with Edit.

MESSAGE SETTINGS

1. In on-hook state, press MENU/OK key + 2 key to enter the Messages interface, the cursor
stops at Write message
2. Press UP↑ or DOWN↓ key to move the cursor to Message settings
3. Press MENU/OK key to confirm and enter the submenu of Profile settings, Common
settings, Memory status
4. Press UP↑ or DOWN↓ key to select your desired one and do relevant operations to the
following:
1) Profile settings : It includes the MSC no(it means the message center number, you can
erase the number using BOOK/DEL key and input a new number using digit key ), Validity(it
means the period of validity, you can press UP↑ or DOWN↓ key to select 1 hour,12
hours,1day,1 week or maximum), Type(it means the mode the message will be sent in,
totally Email ,Page ,Text, Fax for selection)
12