Setting Security Preferences In Computer Setup; Using Passwords - HP Compaq NC6000 Software Manual

Setting Security Preferences in
Computer Setup
Most security preferences are set in Computer Setup. Because
Computer Setup is a non-Windows utility, it does not support the
pointing devices on your notebook. When using Computer Setup,
you must use the keys on your notebook to navigate and make
selections.
Refer in this guide to the

Using Passwords

Most security features use passwords. Whenever you set a
password, write down the password and store it in a secure
location away from the notebook.
■
If you forget your power-on or HP Administrator password,
you cannot start up the notebook or resume from Hibernation
until an authorized service provider resets the notebook. To
contact an authorized service provider, refer to the Worldwide
Telephone Numbers booklet included with the notebook.
■
If you forget the DriveLock user password but know
your DriveLock master password, you can remove
DriveLock protection from the drive. For instructions,
see
Ä
CAUTION: If you forget both your DriveLock user and DriveLock master
passwords, the hard drive is permanently locked and can no longer
be used.
Software Guide
"Understanding DriveLock"
"Computer Setup"
in this chapter.
Security
chapter for details.
3–3