Selecting From The Security Menu - HP Compaq NC6000 Software Manual

Computer Setup

Selecting from the Security Menu

.
Select This Option
Administrator password
Power-on password
DriveLock passwords
SmartCard passwords
Embedded Security
Device security
System IDs
8–4
To Do This
Enter, change, or delete an HP
Administrator password.
Enter, change, or delete a power-on
password.
Enable/disable DriveLock; change a
DriveLock user or master password.
✎
DriveLock settings are
accessible only when you enter
Computer Setup by turning on
(not restarting) the notebook.
Enable/disable support for Smart Card
passwords.
✎
This feature is only supported by
certain Smart Card Readers.
Refer in this guide to the
"Security" chapter.
■
Enable/Disable the Embedded
Security Chip.
■
Restore Embedded Security Chip
to factory settings.
✎
Embedded Security settings are
only accessible if the notebook is
equipped with an Embedded
Security Chip.
■
Enable/disable devices in the system.
■
Enable NIC for inclusion in MultiBoot.
Enter user-defined identification values.
Software Guide