Windows 2000 - HP Compaq NC6000 Software Manual

Preference
Assign a performance mode that
applies when the notebook is
running on battery power.
Assign a performance mode that
applies when the notebook is
running on external power.
Set the notebook to remain in the
same performance mode even
when the power source changes.
Remove the SpeedStep icon from
the taskbar.
Enabling SpeedStep in Computer Setup

(Windows 2000)

Computer Setup, a non-Windows utility, includes settings to
enable or disable SpeedStep. For more information about
Computer Setup, refer in this guide to the
chapter.
To access the SpeedStep settings in Computer Setup:
1. Open Computer Setup, by turning on or restarting the
notebook. Press
message is displayed in the lower left of the screen.
❏
❏
Software Guide
f10
To change the language, press
For navigation instructions, press
Procedure
Select a performance mode
from the Running on Batteries
list, then select OK.
Select a performance mode
from the Plugged In list, then
select OK.
Select the same performance
mode from the Running on
Batteries and Plugged In lists,
then select OK.
1. Select the check box for
2. Select OK in the Advanced
3. Select OK or Apply in the
while the F10 = ROM Based Setup
Remove Icon from Taskbar.
window.
main SpeedStep window.
"Computer Setup"
f2.
f1.
Power
2–15