Setting Up Wireless Lan And Bluetooth; Safeguarding The Notebook; Turning Off The Notebook; Protecting The Notebook From Power Surges - HP Compaq NC6000 Software Manual

Setup

Setting Up Wireless LAN and Bluetooth

If your notebook is equipped with wireless LAN (WLAN) or
Bluetooth, you must configure these devices before using them.
For information on configuring and using your WLAN device,
refer to the Startup guide that shipped with your notebook. The
Startup guide contains information to help you set up your
WLAN and locate the correct documentation.
For information on configuring and using Bluetooth, refer to the
Documentation Library—Bluetooth CD included with your
notebook.
✎
WLAN and Bluetooth options are not supported in all countries.

Safeguarding the Notebook

Turning Off the Notebook

Whenever possible, shut down the notebook by following the
appropriate Windows shutdown procedure:
■
In Windows 2000, select Start > Shut Down > Shut Down,
then select the OK button.
■
In Windows XP, select Start > Turn off computer > Turn off.

Protecting the Notebook from Power Surges

To protect the notebook from the power surges that may be
caused by an uncertain power supply or an electrical storm:
■
Plug the notebook power cord into an optional, high-quality
surge protector. Surge protectors are available from most
computer or electronics retailers.
■
Provide surge protection on the cable that connects a modem
to the telephone line.
■
Run the notebook on battery power or shut down the
notebook and disconnect the power cord. Surge protectors are
available from most computer or electronics retailers.
1–4 Software Guide