Table of Contents
Advertisement
8.12
Utility – Firmware Update
Qu-16 User Guide
The Qu mixer operating firmware can be easily
updated using a USB device (key or drive).
Make sure the USB device has
been previously checked and
formatted to work with the Qu
mixer.
Step1
Download the firmware
Visit
www.allen-heath.com
firmware. The file has a .QUU extension and a name
that includes the model and version number, for
example:
Qu16UpdtV1_10_2411.QUU
your computer.
Step2
Read the Release Notes available on the
download page
Step2
Remove previous Qu Firmware from USB
It is important to remove previous firmware files as the
Qu will attempt to load the first version it finds. The
firmware file is in the root directory of the USB device
and has a .QUU extension.
Step3
Copy the file to the USB root directory
Step4
Plug the USB device into the Qu-Drive port
and run the Firmware Update
Open the
Setup / Utility / Firmware
firmware is found its version number will be displayed
on the screen. For example:
Touch the Update button. The update will start
immediately. The screen goes blank and the Pan
control indicators flash in sequence while the update is
running. After a while the mixer will reboot.
Important note
Do not remove power during the
firmware update. Do not remove the USB device until
the update has completed.
The mixer restarts automatically after the firmware
update.
41
and download the latest Qu
Save the file to
screen. If valid
AP9031 iss.2
Advertisement
Table of Contents
