The Sel Screens - Processing And Routing; Home Screen; Home Screen - Changing User - ALLEN & HEATH Qu-16C User Manual

7.1 The Sel screens – Processing and Routing

7.2 Home Screen

7.3 Home Screen – Changing User
Qu-16 User Guide
Processing Screen
screen presents the processing such as Preamp, EQ,
Gate, Compressor for the channel or master currently
selected using its strip Sel
Touch the top part of the screen to select the
processing block you wish to view or adjust, for
example Preamp or PEQ. This is known as the
TouchChannel.
The lower part of the screen changes to provide
access to the related parameters and additional
related controls.
The physical controls in the SuperStrip and the touch
controls in this screen provide quick access live mixing
functions.
Routing Screen
– When selected this screen lets
you access the assignment and routing for the channel
or master currently selected using its strip
This lets you work with routing to all mixes from one
channel. To work with all channels to one mix use the
Master Strip Mix keys and sends on faders.
Press the Home key. Pressing it again restores the last
selected Sel screen. The Home tab presents:

Current Firmware version

Current User

The 4 Mute Group master buttons

Shut Down button to use before powering down
the mixer

Lock Surface to protect settings when the mixer
is left unattended
This screen lets you log in as one of 3 Users with
different permissions:

Admin – Full access to all functions

Standard – Operation only, setup not allowed

Basic – Fader and Mute control only
Firmware V1.1 does not support User Permissions.
The only User Profile available is Admin.
26
– When selected this
key.
Sel key.
AP9031 iss.2