Page 2
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. Precondition: is displayed (example).
Page 3
D6 – Quick Reference Guide T Pour 250 ml of fresh water into a receptacle and add 1 capful of milk system cleaner. T Immerse the milk pipe in the receptacle. T Place a receptacle under the fine foam frother. T Press the Rotary Switch.
T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
Page 5
E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from specialised dealers. Precondition: is displayed (example). CLEAN CAPPUCC.
Page 6
D6 – Quick Reference Guide T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. T Touch the Maintenance symbol c. , water flows out of the coffee spout several CLEANING times.
Page 7
AGENT IN TANK T Remove and empty the water tank. T Completely dissolve 3 JURA descaling tablets in a receptacle holding 500 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine.
T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.