Thank you for purchasing the IMG4216-25 console server. This Quick Start walks you
through installation, configuration and local operation. For more details please refer to
User Manual
the
Step1
IMG4216-25
Management gateway
Step 2
Plug the console server into the AC mains – the console server has dual
universal AC power supplies with automatic failover built in
Connect the NETWORK1 port on the console server to your network, connect
your serial devices to the console server
LAN devices to the
Note:
If you plan to use out-of-band (OoB) dial-in access, connect an external
modem to the
to a phone line). If you plan to use broadband OoB, connect the access
device (such as DSL modem) to
Step 3
The default console server IP address is
With a web browser on any computer that is LAN connected to the console server:
Enter https://192.168.0.1 into the address bar
Log in using the default system user name
default,
IM4216-25 Quick Start (520002-Rev 3.2)
on the CDROM.
Check kit contents
UTP cables (2) and DB9F-RJ45S
straight and cross-over
Connect the hardware
ETHERNET
CONSOLE
port (or if fitted connect the optional internal modem
Set up the console server
a Welcome screen listing the basic configuration steps is displayed
IMG4216-25
Quick Start Guide
Quick Start &
SERIAL
ports 1-16 and management
ports 1-24
ETHERNET
port 24.
192.168.0.1
(subnet mask
root
Power cables (2)
CDROM
255.255.255.0
and the default password
).
Page 1