Advertisement
Thank you for purchasing the IMG4004-5 console server. This Quick Start walks you
through installation, configuration and local operation. For more details please refer to
User Manual
the
Step1
IMG4004-5
Management gateway
Step 2
Plug the power supply into the AC mains and connect the DC power cable to the
5VDC
Connect the NETWORK port to your network, connect your serial devices to the
IMG4004-5 serial ports
ETH 1-4
ports
Note:
If you plan to use out-of-band (OoB) dial-in access, connect an external
modem to the
access device (such as DSL modem) to
Step 3
The default console server IP address is
With a web browser on any computer that is LAN connected to the console server:
Enter https://192.168.0.1 into the address bar
Log in using the default system user name
default,
IM4004-5 Quick Start (520001-Rev 3.2)
on the CDROM.
Check kit contents
UTP cables (2) and DB9F-RJ45S
straight and cross-over
Connect the hardware
power socket on the IMG4004-5
PORT 1-4
LOCAL
port. If you plan to use broadband OoB, connect the
Set up the console server
a Welcome screen listing the basic configuration steps is displayed
IMG4004-5
Quick Start Guide
Quick Start &
CD-ROM
and management LAN devices to the Ethernet
ETH1
.
192.168.0.1
(subnet mask
root
and the default password
5VDC IEC power
supply and cable
255.255.255.0
).
Page 1
Advertisement
Table of Contents
Related Manuals for Opengear IMG4004-5
Summary of Contents for Opengear IMG4004-5
-
Page 1: Quick Start Guide
IMG4004-5 Quick Start Guide Thank you for purchasing the IMG4004-5 console server. This Quick Start walks you through installation, configuration and local operation. For more details please refer to User Manual on the CDROM. Step1 Check kit contents IMG4004-5 UTP cables (2) and DB9F-RJ45S Quick Start &... - Page 2 DHCP, select System: IP then Network Interface and check DHCP or Static for Configuration Method The IMG4004-5 has an integrated VLAN switch that provides an Ethernet management LAN (with firewall/router isolation and DHCP server). By default these ports are inactive.
- Page 3 A Logging Level may also be set to specify the level of information to be logged and monitored for each that port. Click Apply To enable access through the console server to a locally networked computer host (referred to as a ), select Serial &...
- Page 4 Please register your product to activate the warranty and to automatically receive advice of future firmware updates. Go to: http://opengear.com/product-registration.html Step 6 Advanced configurations The console server offers many more advanced functions including: The Alerts & Logging: Alerts facility monitors serial ports, hosts, user logins, ...
Need help?
Do you have a question about the IMG4004-5 and is the answer not in the manual?
Questions and answers