Opengear IM4216-34 Quick Start Manual

Thank you for purchasing the IM4216-34 console server. This Quick Start walks you
through installation, configuration and local operation. For more details please refer to
User Manual
the
Step1
IM4216-34
Management gateway
Step 2
Power the console server. The –DAC models have dual universal AC power

supplies (with automatic failover) built in, that plug into the mains. The –DDC
models have dual DC supplies (with auto failover) and external screw connector
blocks for connecting to the DC power sources
Connect the NETWORK1 port on the console server to your network, connect

your serial devices to the console server
Note: If you plan to use out-of-band (OoB) dial-in access, connect the internal
modem to the phone line. If you plan to use broadband OoB, connect the access device
(such as DSL modem) to
OoB access, refer to the User Manual or the IM4200-X-G/GU/GV Addendum.
Step 3
The default console server IP address is
With a web browser on any computer that is LAN connected to the console server:
Enter https://192.168.0.1 into the address bar

Log in using the default system user name

default,
Select System: Administration. Enter and confirm a new System Password

and click Apply
IM4216-34 Quick Start (520038-Rev 1.0)
on the CDROM.
Check kit contents
UTP cables (2) and DB9F-RJ45S
straight and cross-over
Connect the hardware
NETWORK2
. If you plan to use an external cellular modem for
Set up the console server
a Welcome screen listing the basic configuration steps is displayed
IM4216-34
Quick Start Guide
Quick Start &
CDROM
SERIAL
ports 1-8/16/32/48
192.168.0.1
(subnet mask
root
and the default password
Power cables (2)
-DAC model only
255.255.255.0
).
Page 1