Opengear ACM5004-GV-E Quick Start Manual

Thank you for purchasing Lighthouse. This Quick Start walks you through both
installation and configuration. For more details refer to the
Step1 Install the Lighthouse appliance
Unpack your system and verify the parts all appear in good working order

Assemble the rails and install the system in the rack following the safety instructions

and the rack installation instructions provided with your system
Proceed to connect Lighthouse hardware appliance to the network and to power - as

outlined in the included
Step2 Activate Dell service
The Dell hardware on which Lighthouse Standard and Enterprise is built is warranted and
serviced by Dell.
It is important to register your system with Dell. This activates your
support and without registration you will not receive hardware support
https://www.onlineregister.com/dell/
Browse to

Lighthouse Quick Start (520060-Rev 1.0)
Dell Getting Started With Your System
Lighthouse
Quick Start Guide
User Manual
on the CDROM.
document
Page 1