Opengear IMG4216-25 Quick Start Manual page 3

A Logging Level may also be set to specify the level of information to be

logged and monitored for each that port
Click Apply

To enable access through the console server to a locally networked computer

(referred to as a
Add Host
Enter the IP address/DNS Name of the host

Edit the Permitted Services used for accessing this host, e.g. HTTPS (TCP

port 443), VNC (TCP port 5900), or add custom TCP or UDP port numbers – only
the services specified here are tunneled through to the host, all other services
are blocked
At this stage you may also specify the level of information to be logged and

monitored for each host access
Click Apply

Step 5
Note: It is recommended that you set up a new Administrator user (in the
group with full access privileges) and login as this new user for all ongoing
administration functions (rather than continuing as

For each new user, select Serial & Network: Users & Groups and click Add
User

Enter a Username and enter and confirm a Password, and nominate the
Accessible Hosts and Accessible Ports the user is allowed to access

To grant limited access to the Management Console, check the user Group, to
grant full access to the Management Console, check the admin Group – by
default the user is granted no Management Console access. Click Apply
IM4216-25 Quick Start (520002-Rev 3.2)
host
), select Serial & Network: Network Hosts and click
Add new users
admin
root
).
Page 3