Chevrolet UPLANDER 2007 Owner's Manual page 405

Tire and Loading Information Label
Example Label
A vehicle specific Tire and Loading Information
label is attached to the center pillar (B-pillar) of your
vehicle. With the driver's door open, you will find the
label attached below the door lock post (striker).
The tire and loading information label shows the
number of occupant seating positions (A), and the
maximum vehicle capacity weight (B) in kilograms
and pounds.
The Tire and Loading Information label also shows
the size of the original equipment tires (C) and
the recommended cold tire inflation pressures (D).
For more information on tires and inflation see
Tires on page 477 and Inflation - Tire Pressure on
page 485.
There is also important loading information on the
vehicle Certification/Tire label. It tells you the
Gross Vehicle Weight Rating (GVWR) and
the Gross Axle Weight Rating (GAWR) for the
front and rear axle. See "Certification/Tire Label"
later in this section.
Steps for Determining Correct Load Limit
1. Locate the statement "The combined
weight of occupants and cargo should never
exceed XXX kg or XXX lbs" on your
vehicle's placard.
2. Determine the combined weight of the driver
and passengers that will be riding in your
vehicle.
3. Subtract the combined weight of the driver
and passengers from XXX kg or XXX lbs.
405