Chevrolet UPLANDER 2007 Owner's Manual page 250

DIC Buttons
Q4R
(Information): Press this button to display
the odometer, trip distance, time elapsed,
average speed, fuel economy, battery voltage, oil
life, and to turn off the DIC.
r
(Set/Reset): Press this button to set or reset
certain functions and to turn off or acknowledge
messages on the DIC.
q
(Menu): Press this button to display the units,
language, personalization, if equipped, compass
zone and compass calibration, if equipped.
See DIC Vehicle Personalization (Uplevel Only) on
page 275 and DIC Compass (Uplevel Only) on
page 254 for more information.
250
Information Button Items
Q4R
(Information): Press this button to scroll
through the following items:
Odometer
Press the information button until the odometer
displays. This mode shows the distance the
vehicle has been driven in either miles or
kilometers.
Trip A and Trip B
Press the information button until A or B displays.
This mode shows the current distance traveled
in either miles or kilometers since the last reset for
each trip odometer. Both trip odometers can be
used at the same time.
The display will show the odometer on the top line
and the trip odometer information, either A or B,
on the bottom line.
Each trip odometer can be reset to zero separately
by pressing the set/reset button while the desired
trip odometer is displayed.