Chevrolet UPLANDER 2007 Owner's Manual page 294

There may be an increase in skipping, difficulty in
finding tracks, and/or difficulty in loading and
ejecting. If these problems occur, check the bottom
surface of the CD. If the surface of the CD is
damaged, such as cracked, broken, or scratched,
the CD will not play properly. If the surface of
the CD is soiled, see Care of Your CDs and DVDs
on page 369 for more information.
If there is no apparent damage, try a known
good CD.
Do not add any label to a CD, it could get caught
in the CD player. If a CD is recorded on a
personal computer and a description label is
needed, try labeling the top of the recorded CD
with a marking pen.
Notice: If you add any label to a CD, insert
more than one CD into the slot at a time,
or attempt to play scratched or damaged CDs,
you could damage the CD player. When
using the CD player, use only CDs in good
condition without any label, load one CD at a
time, and keep the CD player and the loading
slot free of foreign materials, liquids, and
debris.
294
If an error appears on the display, see "CD
Messages" later in this section.
O
/ (Tune): Turn this knob to go to the next
e
or previous track.
{
(Reverse): Press and hold this button to
reverse the current track.
|
(Fast Forward): Press and hold this button to
fast forward through the current track.
RDM (Random): Press this button to hear the
tracks in random, rather than sequential,
order. RANDOM DISC appears on the display.
Press this button again to turn off random play.
RPT (Repeat): Press this button to hear a
track over again. REPEAT appears on the display.
Press this button again to turn off repeat play.
MUTE: Press this button to silence the system.
Press this button again to turn the sound on.