HIKVISION DS-77 NI-SP Series Quick Start Manual page 24

After the recording has been set to "EVENT RECORDING" go to "MOTION DETECT" to set
the motion detection for every camera. In this step, the "COPY" option is available only for
analog cameras, the IP cameras need to be configured individually.
Motion Detection
Setup
Motion Sensitivity
The amount of bright
green squares
indicates the
sensitivity level. (in
this picture the
sensitivity is set to 3)
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Motion Area
The grid indicates
the area, where
motion will be
detected
www.hikvision.com/en/us