HIKVISION DS-77 NI-SP Series Quick Start Manual page 15

6. SETTING UP THE NETWORK
ESS
Networking a DVR/NVR requires 3 steps:
1. Assign an IP address, Default Gateway, Subnet Mask, and a DNS server (Please
note: DNS, not DDNS) to the DVR/NVR
2. Forward the appropriate ports on the router (Port Forwarding).
3. Register DDNS (DDNS registration is required only if the public IP address is Dynamic).
To assigning an IP ADDRESS, go to "MENU">"SYSTEM CONFIGURATION">"NETWORK"
General
Select NIC
Note that the DVR/NVR has a default IP Address set to
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
IP CONFIGURATION
192.0.0.64
www.hikvision.com/en/us
Working
Mode
Default
Route
Enable
DHCP
With DHCP
enabled, the
router will
assign an IP
address to
the
DVR/NVR