Table of Contents
Advertisement
Available languages
Available languages
2. Secure the bottom of the duct with (2) 4 x 8 mm screws.
The range hood is designed to remove smoke, cooking
vapors, and odors from the cooktop area. For best results,
start the hood before cooking, and allow it to operate several
minutes after the cooking is complete to clear all smoke and
odors from the kitchen.
The hood controls are located on the front side of the canopy.
A
G
E
A. Duct cover holes
B. Duct cover
C. Control panel
D. Glass canopy
10
RANGE HOOD USE
B
C
D
F
E. Grease filter
F. LED lights
G. Grease filter release
handle
Complete Installation
1. For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter. See the "Range
Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light.
See the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
Range Hood Controls
A
B
A. Light button
B. Turn the blower on and off
C. Blower speed medium button
D. Blower speed maximum button
Operating the light
The
button controls both lights. Press once for ON and again
for OFF.
Operating the blower
The ON/OFF button turn the blower on and set the blower
minimum speed and sound level for quiet operation. The speed
can be changed anytime during fan operation by pressing the
desired Blower Speed button.
v
C
D
Advertisement
Table of Contents
