Infrared Configuration Guidelines; Enabling The Infrared Port - Compaq Armada 110 Hardware Manual

Infrared Configuration Guidelines

The infrared port default settings are as follows:
If you use Direct Cable Connection and the utility prompts
you to choose a port for the infrared connection, you can
select Serial Cable on COM5 or, if the computer is running a
preinstalled Windows 98, Windows Me, or Windows 2000
Professional operating system, select Parallel Cable on LPT3.

Enabling the Infrared Port

The infrared port is enabled by default each time the computer
starts up.
When the infrared port is enabled, the infrared icon appears
on the taskbar and Infrared Monitor Search is enabled by
default.
While the Infrared Monitor Search is enabled:
When the Infrared Monitor Search is disabled:
Hardware Guide
Port—COM3
Address—3
Interrupt request (IRQ)—3
You can establish an infrared link.
The system cannot initiate Standby. User-initiated
Standby is not affected.
Power is conserved.
You cannot establish an infrared link.
The system can initiate Standby.
External Device Connections
7–5