Removal And Replacement Preliminaries; Required Tools; Service Considerations - Compaq Armada 100 Maintenance And Service Manual

Hp armada 100: user guide

Hide thumbs Also See for Armada 100:

Reference manual (66 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

Table of Contents

chapter

EMOVAL AND

RELIMINARIES

NOTE: In most countries, there are no options for warranty repair other

than "whole unit return." Check with your Geo Service Manager to

determine if warranty repair costs are covered before ordering spare

parts or performing repairs.

This chapter provides essential information for proper and safe removal

and replacement service.

4.1 Required Tools

You will need the following tools to complete the removal and

replacement procedures:

Magnetic Phillips screwdriver

Tool kit (includes connector removal tool, loopback plugs, and case

utility tool)

4.2 Service Considerations

Listed below are some of the considerations that you should keep in

mind during disassembly and assembly procedures.

IMPORTANT: As you remove each subassembly from the computer,

place it (and all accompanying screws) away from the work area to

prevent damage.

Plastic Parts

Using excessive force during disassembly and reassembly can damage

plastic parts. Use care when handling the plastic parts. Apply pressure

only at the points designated in the maintenance instructions.

EPLACEMENT