Item
Internal FDC
Diskette Drives
Internal HDC
IDE Settings
Virus Alert
Disks Menu
Function
Sets when an internal diskette drive is present.
A check mark indicates that the item is
Enabled. An underline indicates Disabled.
Sets the type of diskette disk.
Sets when an internal hard drive is present. A
check mark indicates that the item is Enabled.
An underline indicates Disabled.
Sets the type of hard disk drive in the system.
HDD Timing—Sets the data transmit mode of
the hard drive. The default is Ultra DMA-33.
I/O 32 bit Transfer—If enabled, allows for a
faster transfer rate. The effect is more
noticeable under DOS. The default setting is
Enabled.
HDD Block Transfer—If enabled, allows for a
large capacity hard disk. The default setting is
Enabled.
Provides warning messages if the hard disk
boot sector (partition table) has changed. A
check mark indicates that the item is Enabled.
An underline indicates Disabled.
Default
Enabled
1.44MB
Enabled
N/A
Enabled
Product Description
1-11