Compaq Armada 100 Maintenance And Service Manual page 19

Components Menu
The Components menu changes settings on various components such as
COM and LPT ports.
Item Function
COM Port Assigns COM1 and COM2 to specific functions. In
general, assign COM1 to RS-232 (the serial port);
then assign COM2 to IR.
Mode Setting for COM B—Sets the IR mode for
COM B. The mode depends on the type of device
that the computer will communicate with.
LPT Port Sets the address for the LPT (parallel) port. This
system supports Enhanced Parallel Port (EPP) and
Extended Capabilities Port (ECP) standards. If the
port is set to ECP, choose a DMA channel setting for
that port.
Keyboard Sets the function of the numeric keypad. If you
Numlock disable this option, the numeric keypad on the
computer will not function, even if the Num Lock
indicator is on. However, an external keyboard is not
affected by this feature.
Keyboard Sets the repeat rate and delay time of keystrokes.
Repeat The Key Repeat Rate sets the repeat rate while
holding down a key. The Key Delay item sets
delaying time between key repeats.
1-12 Product Description
Components Menu
Default
Enabled