Power Cord Set Requirements; 3-Conductor Power Cord Set - Compaq Armada 100 Maintenance And Service Manual

Hp armada 100: user guide

Hide thumbs Also See for Armada 100:

Reference manual (66 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

Table of Contents

appendix

OWER

3-Conductor Power Cord Set

The wide range input feature of the Compaq Armada 100S and

Notebook 100 Personal Computers permit them to operate from any line

voltage from 100 to 120 volts or 220 to 240 volts AC.

The power cord sets received with the computer meet the requirements

for use in the country where the equipment is purchased.

Power cord sets for use in countries outside the United States must meet

the requirements of the country where the computer is used. For more

information on power cord set requirements, contact a Compaq

authorized reseller or service provider.

General Requirements

The requirements listed below are applicable to all countries:

1. The length of the power cord set must be at least 5.00 feet (1.5 m)

and a maximum of 6.50 feet (2.0 m).

2. All power cord sets must be approved by an acceptable accredited

agency responsible for evaluation in the country where the power

cord set will be used.

3. The power cord set must have a minimum current capacity of 10A

and a nominal voltage rating of 125 or 250 volts AC, as required by

each country's power system.

4. The appliance coupler must meet the mechanical configuration of an

EN 60 320/IEC 320 Standard Sheet C13 connector for connecting

with the appliance inlet on the back of the computer.

ORD

EQUIREMENTS