Pc Card Assembly - HP 530 Maintenance And Service Manual

PC Card assembly

Description
PC Card assembly
PC Card slot bezel
Before removing the PC Card assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Memory/WLAN module compartment cover (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Display assembly (see
f.
Base enclosure (see
g.
Fan assembly (see
h.
Heat sink (see
i.
System board (see
j.
Remove the PC Card assembly:
Position the system board with the PC Card eject button toward you.
1.
Battery on page 32).
Hard drive on page 33)
Optical drive on page
Switch cover on page
Keyboard on page 43)
Display assembly on page
Base enclosure on page
Fan assembly on page
Heat sink on page 57)
System board on page
Memory module on page
39)
41)
47)
52)
55)
62)
Component replacement procedures
Spare part number
438551-001
438527-001
35)
65