Using Computer Setup; Navigating And Selecting In Computer Setup; Restoring Factory Settings In Computer Setup - HP 530 Maintenance And Service Manual

Using Computer Setup

Navigating and selecting in Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
Open Computer Setup by turning on or restarting the computer, and then pressing
1.
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke:
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
●
Select the File, Security, Diagnostics, or System Configuration menu.
2.
To exit Computer Setup, choose one of the following methods:
3.
To exit Computer Setup without saving your preferences, use the arrow keys to select File >
●
Ignore Changes and Exit. Then follow the instructions on the screen.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
●
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.

Restoring factory settings in Computer Setup

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
Open Computer Setup by turning on or restarting the computer, and then pressing
1.
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Use the arrow keys to select File > Restore defaults, and then press enter.
2.
When the confirmation dialog box opens, press f10.
3.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
4.
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory
settings.
70 Chapter 5 Computer Setup
f10 while the
f10 while the