HP 2133 Mini-Note Maintenance And Service Manual page 58

Description
the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela,
Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Hard drive or solid-state drive (see
c. Top cover (see
d. Audio board (see
e. System board (see
Remove the WLAN module:
CAUTION:
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore computer functionality, and then contact technical support through Help and Support.
1. Turn the system board upside down, with the front toward you.
2. Remove the Torx8 T8M2.5×5.0 screw (1) that secures the WLAN module to the system board.
(The edge of the module opposite the slot rises away from the computer.)
50 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Top cover on page
Audio board on page
System board on page
To prevent an unresponsive system, replace the wireless module only with a wireless
32).
33)
Mass storage device on page
39)
41)
45)
Spare part number
37)