1 1 / 0 4
Thermocouple Inputs
Supported thermocouple types include B, E, J, K, N, R, S, and T, in accordance with software and
jumper settings. See table Thermocouple Input Ranges, on page 15.
Analog Outputs
Shields should be earthed, connected to the earth of the cabinet.
An output can be wired to either current or voltage.
- Use the appropriate wiring as shown below.
- Open the device and set the jumpers according to the instructions beginning on page 8.
To ensure proper performance, a warm-up period of a half an hour is recommended.
Unitronics Industrial Automation
V 2 0 0 - 1 8 - E 3 B
Thermocouple
current/voltage
S n a p - i n I / O M o d u l e
7