CARE AND CLEANING
CLEANING THE LINT FILTER
The lint fi lter must be cleaned after each load.
1. Lift the fi lter from the holder in the door.
2. Open the lint fi lter. Push against the edge with your
thumb as shown in the fi gure.
3. Open the inner fi lter as shown in the fi gure.
Customer Care Center, 1-800-898-1879, www.askousa.com
4. Use your hand or a soft cloth to remove the lint
from all sides of the fi lter. If necessary, use a damp
sponge and a small amount of washing-up liquid to
remove any deposits. Dry the fi lter thoroughly with a
towel.
NOTE!
Clean the surface of the lint (fl uf) fi lter after each
drying program.
5. To close the lint fi lter, follow the reverse order of
steps used for opening. Then, replace the fi lter by
sliding it back into the door. Close the lint fi lter before
closing the door.
15