Page 1
Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
CONTENTS SAFETY INSTRUCTIONS TROUBLESHOOTING Grounding instructions The machine will not start Installation The machine loses all power during a program Packing material Drying takes too long Recycling Error messages Child safety TECHNICAL INFORAMTION child-safe start SERVICE AND GUARANTEE Activating/deactivating Child-safe start Limited Warranty –...
• The interior of the machine should be cleaned periodi- cally by an authorized ASKO service agent. B) Grounding instructions for a permanently connected appliance: • Do not place items exposed to cooking oils in your dryer.
SAFETY INSTRUCTIONS INSTALLATION See the separate installation instructions. PACKING MATERIAL Please sort waste materials in accordance with local guidelines.. RECYCLING This machine is manufactured and labelled for recycling. In order to prevent personal injury, the machine must be made inoperable after deciding to take it out of service. Contact your local authority for information about where and how your machine should be correctly recycled.
DESCRIPTION OF THE TUMBLE DRYER 1. Main power switch 4. Lint filter 2. Panel 5. Outer door 3. Serial number tag and rating plate Customer Care Center, 1-800-898-1879, www.askona.com...
ADVICE AND TIPS BEFORE YOU TUMBLE-DRY Here are some tips that may help you before you begin NOTE! tumble-drying. You can stop the tumble dryer by pressing the Stop button for three seconds or by opening the door. In both HAVE THE CLOTHES BEEN SPUN? cases the programme is stopped and starts from the beginning if restarted.
TUMBLE DRYING SORT YOUR FABRICS WARNING! You will achieve the most uniform drying results if the To reduce the risk of electric shock or injury to persons, items are made of the same type of material. Do up zips read the”Important Safety Instructions” section before and buttons, fasten belts, sort the items and adjust the operating this appliance.
TUMBLE DRYING SELECTING OPTIONS PRESS THE START BUTTON By selecting options, you can tailor a drying program to Remaining drying time suit your requirements. The available options depend An estimate of the remaining drying time will be shown on on the selected program. Once you have started the the display a few minutes after the drying program starts.
TUMBLE DRYING PROGRAMME CHART Here we present the energy and time consumption of a few different programmes. The table shows the effect of using different spin speeds when washing the load. Consumption can vary depending on room temperature, humidity, load, variations in the power supply and selected options.
SETTINGS YOU CAN ALTER THE FOLLOWING SETTINGS: • Language • KidSafe™ Child-safe LANGUAGE Follow these instructions: 1. Turn off the machine using the main power switch. 2. Press and hold the Start button and then press the main power switch. 3.
CARE AND CLEANING CLEANING THE LINT FILTER 4. Close the lint filter and put it back in the door.Close the lint filter before closing the door. The lint filter must be cleaned after each load. 1. Lift the filter from the holder in the door. 2.
TROUBLESHOOTING ERROR MESSAGES NOTE! • Read Drying takes too long in this chapter if Max pro- When starting the tumble dryer for the first time or gram time appears on the display. after a long period without use, you may notice a slight thumping noise.
ASKO (“Authorized ASKO Dealer”), or workmanship and is reported to ASKO within 5 that this ASKO Product is free of defects in material and days from date of purchase. workmanship, subject to the terms and conditions set forth herein.
SERVICE AND GUARANTEE BEFORE CONTACTING THE CUSTOMER Should you need further assistance, you can write to ASKO Appliances with any questions or concerns at the CARE CENTER address below: Before you contact the Customer Care Center, make sure ASKO Distribution North America, LLC.
Heater 2 On (3000 W/15 A) and Heater 2 Off (1950 Stacking W/10 A). The tumble dryer can be placed on top of a ASKO washing machine. In this case you use the stacking 4. Press the Start button once to save your selection.
Page 17
5. Fasten or undo the rear feet of the appliance until it is fully level, either on the floor or on the washing 1. Undo the screw on the back of the ASKO washing machine. machine as shown in the figure.
2. Remove the exhaust outlet cover. 3. Remove the stub pipe from the rear exhaust outlet and place it in the outlet you plan to use. Asko dryers have a "T-style" exhaust vent that allows you to Vent 4. Push the duct onto the stub pipe and secure it with a...
V.) To use this receptacle, you must use the ready- fitted plug supplied with the washing machine or an equivalent. ASKO washers rated 208–240 V have two internal fuses of 15 A each. The machine should only be connected to a grounded TO CONNECT THE EXHAUST DUCT TO wall socket.
Page 20
INSTALLATION Connecting a 3-wire Power Cord Electrical Connections ! WARNING ! WARNING ! Before starting this procedure, be sure the power is Read the Electrical requirements and grounding turned off at the breaker/fuse box. instructions before connecting the tumble dryer. Electric models of the dryer are manufactured for a 3-wire connection system.
Page 21
INSTALLATION 9. Plug dryer into wall receptacle. center terminal block. 10. Turn power on at breaker/fuse box. 6. Connect ground (green) wire of cord to external ground conductor screw. Connecting a 4-wire Power Cord 7. Connect neutral (white) wire of cord under center screw of terminal block.
REVERSING THE DOOR 1. Hinge pins (top and bottom) 4. Locking hook 2. Cover plate 5. Hinges (left + right side) 3. Plastic plugs (on the upper and lower edges) 6. Plinth Customer Care Center, 1-800-898-1879, www.askona.com...
Page 23
REVERSING THE DOOR You can choose whether the door is hung on the right or 7. Refit the door by loosening the hinge screws slightly, the left. affixing the door, and closing it. Tighten the hinges. Replace the Toe kick. Follow these instructions: 1.
QUICK GUIDE TURN ON THE MAIN POWER SWITCH Load the garments. Close the door. SELECT A PROGRAM AND ANY OPTIONS Turn the program selector to the desired program. PRESS THE START BUTTON DRYING PROGRAM FINISHED The text End appears on the display when the programme is finished. Clean the lint filter after each load.
Need help?
Do you have a question about the T884XLHPW and is the answer not in the manual?
Questions and answers