Table of Contents
Advertisement
Sending Faxes > FAX Delayed Transmission
Batch Transmission Function
When fax originals to be sent to the same destination are set to the same transmission start time with delayed
transmission, you can send up to 10 groups of originals using batch transmission. This function prevents repeated
communication to the same destination and reduces the communication cost.
NOTE
You cannot send originals as a batch transmission in the case of direct transmission.
In the case of broadcast transmission, when you have set two or more groups of originals to the same transmission
start time, and each group includes the same receiving system fax number, you cannot send the originals as a batch
transmission.
When the transmission start time has come, and there are fax originals waiting for redial to the same receiving
system, the waiting originals are also sent together as a batch transmission.
When job accounting is ON, only the originals with the same account ID set using delayed transmission are sent as a
batch transmission.
Cancelling Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, use the procedure below.
1
2
Immediate transmission
To send delayed transmissions immediately rather than waiting for the specified time, use the procedure below.
1
2
Display the screen.
[Status/Job Cancel] key > [Scheduled Job]
Canceling a job.
Select the job you want to cancel and select [Cancel] > [Yes].
The selected job is deleted.
Display the screen.
[Status/Job Cancel] key > [Scheduled Job]
Immediate transmission.
Select the job you want to send by immediate transmission, and select [Menu] > [Start Now] >
[Yes].
The transmission will start.
3-20
Advertisement
Table of Contents
Troubleshooting
