Troubleshooting - Tommy Bahama COPA BREEZE TB311DBZ01 Owner's Manual

WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX
!
OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
TROUBLE
1. Fan will not
start.
2. Fan sounds
noisy.
3. Fan wobbles
excessively.
Trouble Shooting
PROBABLE CAUSE
1. Fuse or circuit breaker
blown.
2. Loose power line connections
to the fan, or loose switch wire
connections in the switch
housing.
3. Wall switch is off.
1. Blades not attached to fan.
2. Screws securing fan blade
flanges to motor are loose.
3. Wire connectors inside
switch housing rattling.
4. Screws holding blades to
flanges are loose.
5. Loose screws in motor
housing.
1. Setscrew in motor coupling
is not tightened securely.
2. Setscrew in the hanger ball/
downrod assembly is loose.
3. Screws securing fan blade
flanges to motor are loose.
4. Fan blade flanges not
seated properly.
5. Hanger bracket and/or
ceiling outlet box is not
securely fastened.
6. Fan blades out of balance.
SUGGESTED REMEDY
1. Check main and branch
circuit fuses or circuit
breakers.
2. Check line power connections
to fan and switch wire
connections in the switch
housing.
3. Turn on wall switch.
WARNING: Make sure
!
main power is turned off.
1. Attach blades to fan before
operating.
2. Check to make sure the screws
which attach the blade flanges
to the motor are tight.
3. Check to make sure wire
connectors in switch housing
are not rattling against each
other or against the interior
wall of the switch housing.
WARNING: Make sure main
!
power is turned off.
4. Tighten screws securely.
5. Check to make sure all screws
in motor housing are snug
(not over-tight).
1. Raise coupling cover and
tighten setscrew securely.
2. Tighten the setscrew in the
hanger ball/downrod assembly.
3. Check to be sure screws
which attach the fan blade
flanges to the motor are tight.
4. Check to be sure that the screws
securing the fan blade flanges
seat firmly.
5. Tighten the hanger bracket
screws to the outlet box,
and/or secure outlet box.
6. Interchanging an adjacent
(side-by-side) blade pair can
redistribute the weight and
result in smoother operation.
Or use supplied balancing
kit to balance blades.
13
U.L. Model No.: TB311-1