Table of Contents
Advertisement
MULTIDETEK 2 User's manual
7.3 Settings Menu
7.3.1 Setting
In this menu, there are all the parameters of the MultiDetek2. These parameters should
not be changed without contacting LDetek support. The available settings may vary
depending on the software version. To update the software, please contact LDetek
support to ensure the versions are compatible with your system.
The settings are split into 2 categories. The first one is named "Method". It is where the
settings relative to the current method are configured. Parameters such as valve timing,
ovens temperatures and flows setpoint are defined in that section. If the system has more
than one method, it is required to change the method to access the others methods settings.
The second category is named "Machine". It is where the settings regarding the Multitetek2
are configured. Parameters such as streams, sequences and 4-20mA module are defined in
that section.
41
Advertisement
Table of Contents
