Settings Menu - LDetek MD3 User Manual

7.3.

Settings Menu

7.3.1. Setting
In this menu, there are all the parameters of the MultiDetek3. These parameters should
not be changed without contacting LDetek support. The available settings may vary
depending on the software version. To update the software, please contact LDetek
support to ensure the versions are compatible with your system.
The settings are split into 2 categories. The first one is named "Methods". It is where the
settings relative to the methods are configured. Parameters such as peak and peakset are
defined in that section.
The second category is named "Machine". It is where the settings regarding the GC are
configured. Parameters such as flows, ovens, detectors, sensors, valves, streams, sequences,
columns and 4-20mA module are defined in that section.