Set Positions For The Television To Turn To - Bang & Olufsen BeoCenter 6 Reference Book

28
If your television is equipped with the
optional motorised stand, you can
turn it using the Beo4 remote control.
Furthermore, you can program the
television to turn automatically to
face your favourite viewing position
when you switch on the television,
turn to a different position when you
listen to radio, and turn away to a
standby position when you switch it
off.
You can also turn your television by
hand.
Downloaded from ManualsNet.com

Set positions for the television to turn to

Choose one position for when you switch the
television on, one for radio and one for when
you switch it off.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
> Press GO to bring up the STAND POSITIONS
menu.
> Press GO to determine the VIDEO position.
> Press or
according to your viewing position.
> Press GO to store the position.
To store a stand position for when the radio
is switched on ...
> Press to move to AUDIO.
> Press GO to determine the AUDIO position.
> Press or
as you wish.
> Press GO to store the position.
NOTE! For information about first-time installation
of the motorised stand, refer to the chapter 'First-
time setup of your television' on page 16.
search engine
to highlight STAND POSITIONS.
to turn the television, and place it
to turn the television, and place it
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS STAND POSTIONS
VIDEO
TV ON
AUDIO
TV STANDBY
STANDBY
select
GO
To store a stand position for when the
television is switched off and in standby ...
> Press to move to STANDBY.
> Press GO to determine the STANDBY position.
> Press or to turn the television, and place it
as you wish.
> Press GO to store the position.
> Press EXIT to leave the menus.
select
GO