Table of Contents
Advertisement
Operation
Operation
Emergency Stop
To engage the Emergency Stop and stop the ram from
moving, perform the following steps:
1. Close the main air slider valve (CA). See F
F
. 10
IG
2. Move the ram hand valve lever to the OFF position.
14
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever
you see this symbol.
. 10.
IG
This equipment stays pressurized until pressure is man-
ually relieved. To help prevent serious injury from pres-
surized fluid, such as skin injection, splashing fluid and
moving parts, follow the Pressure Relief Procedure
when you stop spraying and before cleaning, checking,
or servicing the equipment.
Follow the Pressure Relief Procedure found within the
Therm-O-Flow 200 and Therm-O-Flow 20, Instruc-
tions-Parts manuals.
334198K
Advertisement
Table of Contents
