MECHANICAL MODE (OPERATING THE VCR WITHOUT A CASSETTE TAPE)
1) Remove the FRONT LOADING MECHANISM from the DECK MECHANISM.
2) Pull the F/L RACK.
3) The S/T POLE BASES are loaded and PLAY BACK MODE starts.
4) Turn off the power when the MECHANISM is in the desired position.
TENSION POLE POSITION ADJUSTMENT
1) Change MECHANICAL MODE to PLAY MODE.
2) Confirm that the datum hole of TENSION LEVER is aligned with the datum hole of the MAIN BASE. To adjust turn the
BAND BRAKE ADJUST CAP clockwise or anti-clockwise until the two datum holes are aligned with each other.
Tension pole position adjustment
BAND BRAKE
ADJUST CAP
Tension pole position adjustment
DATUM HOLE OF
TENSION LEVER
Fig.41.
Fig.41.
24
DATUM HOLE
OF MAIN BASE