MECHANICAL ADJUSTMENT (Cont.)
5) Ensure that the triangular mark "A" on the L LOADING ASSEMBLY is aligned with the notch "B" on the R LOADING
ASSEMBLY, as shown in fig.39.
6) Ensure that the teeth of the LOADING RACK ASSEMBLY are aligned with those of the R LOADING ASSEMBLY so that the
hole of the LOADING RACK ASSEMBLY aligns with the circular mark on the R LOADING ASSEMBLY, as shown in fig.39.
LOADING RACK ASSEMBLY
HOLE OF LOADING RACK
CIRCULAR MARK OF R LOADING ASSEMBLY
Datum position of loading rack assembly and right and left loading lever assembly
R LOADING ASSEMBLY (B)
NOTCH IN R LOADING ASSEMBLY
Fig.39.
22
L LOADING ASSEMBLY
TRIANGULAR MARK ON
L LOADING ASSEMBLY (A)