Table of Contents
Advertisement
FE HEAD REMOVAL
1) Remove the screw (1) fixing the FE HEAD (2) and remove the FE HEAD from the MAINBASE.
Fe head removal
Fig.33.
REEL GEAR TOTAL ASSEMBLY & CONNECT PLATE REMOVAL
1) Turn over the DECK MECHANISM and remove the POLY WASHER (1) from the REEL GEAR POST (2).
2) After separating tab "B" of the MAINBASE, remove the REEL GEAR TOTAL ASSEMBLY (3) from the MAINBASE.
3) Remove the CONNECT PLATE (4) from the MAINBASE by pushing it in the direction of the arrow.
Reel gear total assembly and
connect plate removal
Fig.34.
NOTE
When removing the CONNECT PLATE with the F/L RACK installed, take care not to damage or bend the CONNECT PLATE.
After assembling or disassembling the REEL GEAR TOTAL ASSEMBLY, take care not to get OIL, GREASE or other
substances on the REEL BELT.
Take care not to deform or break tab "B".
Check the assembly state & the operating state of the REEL GEAR TOTAL ASSEMBLY before assembling.
After reassembling check the FF, REW, PLAY and REVIEW MODES and the existence of noise when operating the MODES.
19
Advertisement
Table of Contents
